Konig Set 171 Mixed Greys

Konig range of fillers have been designed for various types of damage on a wide range of materials. These are all made from high quality raw materials and are suitable for use on natural and artificial substrates.

£25.06£36.96

Clear

Additional information

Weight 300 g
Dimensions 20 × 10 × 1 cm
gtin

15060599160402

Part Number

KO140-171, KO141-171

Softwax / Hardwax

Hardwax, Softwax

Colour

7015 Slate Grey, 7016 Anthracite Grey, 7030 Stone Grey, 7031 Blue Grey, 7032 Pebble Grey, 7035 Light Grey, 7036 Platinum Grey, 7038 Agate Grey, 7040 Window Grey, 9002 Grey White

Konig Softwax is ideal for filling pin holes and damaged edges. Can be used on natural timber or artificial surfaces.

The Hardwax is a durable wax filler, designed for repairs to areas subject to severe use. Ideal for repairing edge damage as well as filling holes and scratches of more significant damage. Applied using our range of battery, gas or electric heating irons.

Konig Softwax

  • Remove all loose and splintered particles and indent damage edges. Use König Touch-Up products to colourdamaged edges that are lighter than the base colour.
  • Use the tip of the Special Fillers Applicator 161500 to take little quantities of the wax stick and fill into the damage area.
  • Surplus filler to be planed off with the Special Fillers
    Applicator (use sharp grooves on a flat surface, round grooves at edges).
  • Intermediate sealing with Special Repair Lacquer.
  • Restore grain with König Touch-Up material. The grain pattern can be restored by slightly scratching (e.g. with an upholstery needle).
  • Finally, apply Special Repair Lacquerto seal and to protect the damage area from dust, dirt and to adjust the gloss sheen, if necessary.

Konig Hardwax

  • Use the hot tip of the Electric Heater 440 or the Hot Knife 439 to melt off small quantities of Hard Wax and fill into the damage area.
  • Important: Do not set the temperature of the heater too high. Surplus filler to be planed off before wax cools down completely, using the Special Fillers Applicator (sharp grooves on a flatsurface, round grooves at edges).
  • Surplus wax to be wiped off rapidly with the Scotch Brite using light pressure.
  • Restore grain with König Touch-Up material. The grain pattern can be restored by slightly scratching (e.g. with an upholstery needle).
  • Finally, apply Special Repair Lacquer to seal and to protect the damage area from dust, dirt and to adjust the gloss sheen, if necessary.

Related Products

Share this:

X