Konig Set 130 40 Wood Shades

Konig range of fillers have been designed for various types of damage on a wide range of materials. These are all made from high quality raw materials and are suitable for use on natural and artificial substrates.

£37.34

Additional information

Weight 350 g
Dimensions 20 × 20 × 1 cm
gtin

5055691405233

Unit of sale

40 pack

Part Number

KO140-130, KO141-130

Softwax / Hardwax

Hardwax, Softwax

Colour

103 Cherrywood, 104 Red Cherrywood, 109 Light Walnut, 110 Medium Walnut, 111 Dark Walnut, 112 Walnut Brown, 113 Light Mahogany, 114 Dark Mahogany, 119 Medium Pearwood, 120 Dark Pearwood, 121 Light Macore, 122 Dark Macore, 126 Limba, 138 Teak, 139 Dark Rosewood, 140 Natural Oak, 141 Light Oak, 142 Medium Oak, 143 Dark Oak, 144 Brown, 156 Light Beech, 157 Mud Oak, 158 Beech, 159 Larch, 160 Medium Alder, 161 Medium Alder Decor, 162 Dark Alder Honey, 163 Brown Mahogany, 165 Light Rosewood, 178 Natural Maple, 179 Maple Reddish, 201 Birch, 206 Medium Pine, 207 Natural Pine Sap, 208 Natural Pine Heart, 302 Brown Oak, 303 Rustic Oak, 900 Natural, 9005 Jet Black, 9010 Pure White

Konig Softwax is ideal for filling pin holes and damaged edges. Can be used on natural timber or artificial surfaces.

The Hardwax is a durable wax filler, designed for repairs to areas subject to severe use. Ideal for repairing edge damage as well as filling holes and scratches of more significant damage. Applied using our range of battery, gas or electric heating irons.

Konig Softwax

  • Remove all loose and splintered particles and indent damage edges. Use König Touch-Up products to colourdamaged edges that are lighter than the base colour.
  • Use the tip of the Special Fillers Applicator 161500 to take little quantities of the wax stick and fill into the damage area.
  • Surplus filler to be planed off with the Special Fillers
    Applicator (use sharp grooves on a flat surface, round grooves at edges).
  • Intermediate sealing with Special Repair Lacquer.
  • Restore grain with König Touch-Up material. The grain pattern can be restored by slightly scratching (e.g. with an upholstery needle).
  • Finally, apply Special Repair Lacquerto seal and to protect the damage area from dust, dirt and to adjust the gloss sheen, if necessary.

Konig Hardwax

  • Use the hot tip of the Electric Heater 440 or the Hot Knife 439 to melt off small quantities of Hard Wax and fill into the damage area.
  • Important: Do not set the temperature of the heater too high. Surplus filler to be planed off before wax cools down completely, using the Special Fillers Applicator (sharp grooves on a flatsurface, round grooves at edges).
  • Surplus wax to be wiped off rapidly with the Scotch Brite using light pressure.
  • Restore grain with König Touch-Up material. The grain pattern can be restored by slightly scratching (e.g. with an upholstery needle).
  • Finally, apply Special Repair Lacquer to seal and to protect the damage area from dust, dirt and to adjust the gloss sheen, if necessary.

Related Products

Share this:

X