Konig Set 120 20 Wood Shades

Konig range of fillers have been designed for various types of damage on a wide range of materials. These are all made from high quality raw materials and are suitable for use on natural and artificial substrates.

£25.06£36.96

Clear

Additional information

Weight 300 g
Dimensions 20 × 10 × 1 cm
Colour

104 Red Cherrywood, 109 Light Walnut, 113 Light Mahogany, 114 Dark Mahogany, 119 Medium Pearwood, 141 Light Oak, 144 Brown, 156 Light Beech, 158 Beech, 160 Medium Alder, 161 Medium Alder Decor, 162 Dark Alder Honey, 178 Natural Maple, 179 Maple Reddish, 207 Natural Pine Sap, 208 Natural Pine Heart, 303 Rustic Oak, 901 Clear, 9005 Jet Black, 9010 Pure White

Konig Softwax is ideal for filling pin holes and damaged edges. Can be used on natural timber or artificial surfaces.

The Hardwax is a durable wax filler, designed for repairs to areas subject to severe use. Ideal for repairing edge damage as well as filling holes and scratches of more significant damage. Applied using our range of battery, gas or electric heating irons.

Konig Softwax

  • Remove all loose and splintered particles and indent damage edges. Use König Touch-Up products to colourdamaged edges that are lighter than the base colour.
  • Use the tip of the Special Fillers Applicator 161500 to take little quantities of the wax stick and fill into the damage area.
  • Surplus filler to be planed off with the Special Fillers
    Applicator (use sharp grooves on a flat surface, round grooves at edges).
  • Intermediate sealing with Special Repair Lacquer.
  • Restore grain with König Touch-Up material. The grain pattern can be restored by slightly scratching (e.g. with an upholstery needle).
  • Finally, apply Special Repair Lacquerto seal and to protect the damage area from dust, dirt and to adjust the gloss sheen, if necessary.

Konig Hardwax

  • Use the hot tip of the Electric Heater 440 or the Hot Knife 439 to melt off small quantities of Hard Wax and fill into the damage area.
  • Important: Do not set the temperature of the heater too high. Surplus filler to be planed off before wax cools down completely, using the Special Fillers Applicator (sharp grooves on a flatsurface, round grooves at edges).
  • Surplus wax to be wiped off rapidly with the Scotch Brite using light pressure.
  • Restore grain with König Touch-Up material. The grain pattern can be restored by slightly scratching (e.g. with an upholstery needle).
  • Finally, apply Special Repair Lacquer to seal and to protect the damage area from dust, dirt and to adjust the gloss sheen, if necessary.

Related Products

Share this:

X