My Account
Mohawk Finishing Products
Mohawk Perfect Blend Lacquer

Mohawk Perfect Blend Lacquer

A premium blended nitrocellulose lacquer displaying excellent adhesion over waxed and polished surfaces and areas contaminated with silicone.

£21.49

See more MOHAWK finishing products
Add to wishlist
  • Clean surface to be sprayed
  • For best results, the can temperature should be 18.3° – 32.2°. SHAKE WELL BEFORE USING for at least one minute after ball rattles to ensure sheen uniformity.
  • Shake periodically during use as flatting material can settle during use.
  • Point opening of spray button toward object, holding can 6 to 8 inches away from surface to be coated. Press spray button firmly.
  • Use steady, even strokes. Several thin coats give a better finish than one heavy coat.
  • Allow coating to dry between coats. For best results, use in a dust-free environment.
Product details

Features & Benefits

Perfect Blend™ aerosol is formulated to produce a soft spray and fine atomization which yields virtually no overspray and excellent flow out.

Perfect Blend™ is perfect for touch-up because the soft spray coupled with low solids gives it superior blending with the surrounding area, so it does not create the “halo” effect.

Perfect Blend™ also offers excellent adhesion over waxed or polished surfaces, including silicone contamination and does adhere to most metals and plastics.

 

Konig Softwax

  • Remove all loose and splintered particles and indent damage edges. Use König Touch-Up products to colourdamaged edges that are lighter than the base colour.
  • Use the tip of the Special Applicator to take little quantities of the wax stick and fill into the damage area.
  • Surplus filler to be planed off with the Special Applicator (use sharp grooves on a flat surface, round grooves at edges).
  • Intermediate sealing with Special Repair Lacquer.
  • Restore grain with König Touch-Up material. The grain pattern can be restored by slightly scratching (e.g. with an upholstery needle).
  • Finally, apply Special Repair Lacquer to seal and to protect the damage area from dust, dirt and to adjust the gloss sheen, if necessary.

Konig Hardwax

  • Use the hot tip of the Gas Heat Iron to melt off small quantities of Hard Wax and fill into the damage area.
  • Important: Do not set the temperature of the heater too high. Surplus filler to be planed off before wax cools down completely, using the Special Applicator (sharp grooves on a flatsurface, round grooves at edges).
  • Surplus wax to be wiped off rapidly with the Scotch Brite using light pressure.
  • Restore grain with König Touch-Up material. The grain pattern can be restored by slightly scratching (e.g. with an upholstery needle).
  • Finally, apply Special Repair Lacquer to seal and to protect the damage area from dust, dirt and to adjust the gloss sheen, if necessary.
DATA sheets

Perfect Blend Lacquer DATA Sheet

SKU RNG_20341 Category Tags , , , ,

Additional information

Weight 400 g
Dimensions 7 × 7 × 20 cm
gtin

663392002412
Part Number

KM102-0705, KM102-0710, KM102-0720, KM102-0740, KM102-0760, KM102-0780
Choose sheen level

Dead Flat, Flat, Matt, Satin, Semi Gloss, Gloss

Related products

Facebook
Twitter
LinkedIn
WhatsApp
Pinterest
  • 01244 375029
  • sales@masterfinish.co.uk
  • Master Finish by APS. Unit 19 Dee View Boulevard, Europa Park, Chester. CH1 4NP.