Morrells Two-Part Coloured Wood Filler

Mixing

1. Add 2-2.5% of the supplied hardener to the filler
2. In cold conditions, increase hardener use to 3-3.5% of supplied
3. In hot conditions, reduce hardener use to 1-1.5% of supplied
4. Thoroughly mix the two components together
5. Once mixed the filler has a working life of 5 minutes

Application

1. Apply the wood filler onto a stable, clean, dry surface by knife or scraper
2. Apply the wood filler in slight excess to allow for shrinkage during drying
3. Deep holes should not be filled with the one part wood filler in a single operation due to the risk of excessive shrinkage and crumbling of the dried filler
4. Sand the filler flat with 180-240G Sprayshop® sanding paper
5. The surface is then ready for normal finishing processes if required