Features & Benefits

Hawk’s Slip Resistance Stencils can be applied on porcelain, ceramic and fiberglass or tubs that don’t require refinishing.

They measure 15.375 inches x 24 inches which can be overlapped for larger areas. Pack of ten stencils

Use with Hawk’s StandFast™ Traction Additive.

For steel bath application:

• Remove all soap residue using Surface Wash.
• Apply undiluted MicroCleanTM Step I Cleaner evenly over the surface and use either 200 grit sandpaper, or a Scotch Brite Pad to scrub.
• Apply undiluted MicroClean Step II De-Filmer evenly over the surface and use either 200 grit sandpaper, or a Scotch Brite Pad to scrub and remove particulates. Rinse thoroughly with warm water and sponge dry. The surface is pH neutral.
• Apply stencil to surface.
• Mix StandFast Non-Skid Additive – 4 parts resin, 2 parts Catalyst, 3 parts StendFast Traction additive.
• With a 3-inch roller, apply the StandFast mixture to surface and spread evenly.
• Allow solvent to flash. Apply a second coat.
• Cure time depends on the topcoat used.

For fiberglass or previously Resurfaced tubs

• Remove all soap residue using Surface Wash.
• Sand (degloss) area where StandFast Non-Skid Additive will be affixed.
• Follow mix instructions and applications above.
• If using stencils, apply Bonding Agent on fiberglass surfaces. Bonding Agent may not be effective on previously Resurfaced fiberglass surfaces.