• For the opaque dyeing of closed surfaces in the wood, plastic and metal sector.
• For a quick uncomplicated dyeing of corners, edges and grooves.
• To varnish mitre grooves on foil-covered PVC window profiles and doors.
• For indoor and outdoor use..

• Shake pen well for at least 10 secs – mixing balls must be audible.
• Take off cap, hold pen upside down and briefly de-aerate by pressing with thumb and forefinger on the lower part of the housing (pressure adjusting is audible).
• Hold pen with tip pointing downwards and press slightly until tip is soaked with dye.
• Touch-up with rapid strokes.
• For exterior use, the lacquer coats have to be stronger. When working on windows and doors, do not use in the gasket area.
• If lacquer ceases to flow well, press again.
• Replace cap after use.
• Areas to be treated have to be free from dust, grease and silicone.
• Dried-up tips to be washed out in nitrocellulose thinner. If pen has not been used for a long time or where pigment separates at the tip just replace with a new tip

Colour Edging Pen Plus Technical

How to YouTube Video